Density Measurement Float

Whether for a new or existing installation, the Density Measurement Float easily installs on the OPW Magnetostrictive Probe. Combining industry-leading water, product and density measurement, the SiteSentinel® family Density Measurement Float uses a single magnetostrictive in-tank probe assembly. The float continuously measures the average density of the fuel in the tank to deliver precise density measurements of ±0.04% in real time. Density Measurement Floats are available for gasoline and diesel applications.

Features & Benefits

Density Measurement Float Features

Precise - Continuously measures the average density of the fuel in the tank, providing precise density measurements of ±0.04%
Easy Installation - Density and level measurement capabilities combined on one I.S. channel simplify installation requirements
Easy Integration - As with every OPW tank gauge component, the density float works
seamlessly with the SiteSentinel® family of products
Cost-Effective - Easily retrofitted to new and existing in-tank SiteSentinel® 924B level probes, providing an economical solution to ensure continuous product quality
Provides real-time density information
Floats available for gasoline and diesel
Trouble-free design
Small float profile enables more space on probe rod to be utilized
Displays density in kg/m3, g/cc or API
Fuel density reports can be displayed in real-time on SiteSentinel® family of controllers
or exported to an external display
Density readings can be configured to either nominal or temperature-corrected density
Easy to retrofit to existing in-tank level probes (SiteSentinel® 924B Probe)
Density and level measurement combined on one (1) I.S. module position connection without the need for a dedicated input channel or additional wiring
Fits through the same 2.0 in (5 cm) opening in the tank that’s used by the probe
Economical solution to ensure continuous product quality
Four (4) probes (with density float) per I.S. Channel (SiteSentinel® Integra 100™, SiteSentinel® Integra 500™, SiteSentinel® Nano® and SiteSentinel® iSite™)
Dedicated density probes can support three (3) density floats per probe to ensure product quality – not available with level measurement

Applications

Density Measurement Float Applications

Provides precise, real-time data about product quality by continuously measuring fuel density
Applicable in petroleum products designed for both underground (UST) and above ground (AST) rigid probe applications
Fits through the same 2.0 in (5 cm) opening in the tank that’s used by the probe
Single float per standard in-tank probe or multi-float for dedicated triple-float density probe

Technical Specifications

Density Measurement Float Specifications

Material: Nitrophyl®, Delrin® and stainless-steel spring
Dimensions: 2 in (diameter) x 8 in [5.1 cm (diameter) x 20.3 cm]
Precision: ±0.04%
Density Range: 0.6 - 1.0 g/cc
Suggested Location: 6 inches (15.2 cm) from the bottom of the probe. NOTE: Use two (2) set screws at the top of the float to hold it in position
Number of Floats per SiteSentinel® Integra 100™, Integra 500™, SiteSentinel® Nano® or iSite™ System: One per probe or multi-float dedicated probe equipped with three (3) floats

Downloads

Catalog Page

Density Measurement Float

Data Sheet

Density Measurement Float

OPW, A Dover Company

Density Measurement Float

Density Measurement Float Features

Density Measurement Float Applications

Density Measurement Float Specifications

Catalog Page

Data Sheet

Products

Other Product Families

Contact OPW